top of page

Zubehör

for LED controller
40-FA.210.350-500.MAF and
40-FA.210.12-24.MAF
functions:
single color switch, permanent color gradient in three different speeds,
a self-programmable gradient
with 256 minutes max.
dimmable in three different intensities
authorized in the EU and Switzerland
IP 65

Funkfernbedienung

remote control

Is needed to connect LEDs with
our controls.
wires= red, green, blue, black
for RGB LEDs
with AMP plug

L=300 mm

Special lengths possible if requested.

Anschluss

connecting cable

Is needed to connect LEDs with
our controls.

Anschlusskabel

Für Domsticusplatinen / connection cable for Domesticus

Is needed to connect LEDs with
our controls.
RGB-W cable:
Cable : LiYY 5 x 0.34 mm²,
Side 1: ferrules (without phoenix plug)
Side 2: JST 8-pin pin housing

Anschlusskabel

mit JST Stecker / Connection cable with jst plug

Is needed to connect LEDs with
ourpower sources
wires= black(-), black-red(+)
for single coloured LEDs
with round plug

Anschlusskabel RUND 2-polig

Connection cable ROUND 2-pole

Patch cable with RJ12 connectors L= 1.000 mm
Multiversum

Datenkabel RJ12

Data cable RJ12

Master/Multitask 2/Slave connector

Datenkabel RJ45

Data cable RJ45

LED dimmer 12-24 volts 8 amperes silver
PWM dimmer 0-100%
dimmable with a rotary knob
max. 96 watts at 12 volts
max. 192 watts at 24 volts
L= 72mm
W= 65mm
H= 40mm

Drehdimmer

sealed with white plastic,
with microfuse
according to VDE 570
dimmable with anykind of inductive dimmers
dimmable with Fasel sauna control series:
FCU 3000 and FCU 4000
IP 20

Eisenkerntransformator für 24 Volt Leuchtmittel

Iron core transformer for 24 volt lamps

Is needed for the WW/ RGB/ RGBW spots

Endstück

für Strahler mit Jst Stecker / End piece for jst plug

Protection IP3X: no protection against humidity

Funkfernbedienung für Domesticus Steuerung

remote controll for Domesticus

RGB control for controlling RGB LED modules in the colored light area.

Controller: Voltage: 12-24V DC
Current: 3 x 3.33A max
Power: max. 120W / 240W (12VDC / 24VDC)
Control: negative (common anode)
Radio Frequency: 869.5MHz
Range (line of sight): up to 20 m

Dimensions: L 178 x W 46 x H 18 mm

Material: Plastic
Delivery: incl. strain relief

controllers
per remote control: max. 4 (with optimal radio connection)
Remote control: Voltage (battery): 4.5 V DC - 3 x AAA (not included)
Radio Frequency: 869.5MHz
Transmission power (Ps) < 0 dBm
Range (line of sight): up to 20 m
Dimensions: L 120 x W 48 x H 18 mm
Material: Plastic
Features: - On / Off -
RGB color change via touch wheel -
Dimming buttons for red / green / blue -
Gradient: Start / Stop -
Gradient: speed.
Degree of protection: according to DIN EN 60529: IP20 Protection class: (EN 61140) III
Voltage: 12V 24V, Power: 240W
Type of dimming: radio control.

Funksteuerungsset

RGBW Controller

for controlling two-color LED modules in the white light range

consisting of:
Controllers:
Voltage: 12-24 V DC, current: max. 2 x 5 A, power: max. 120 W / 240 W (12 V DC / 24 V DC),
Control: negative (common anode), control signal: PWM, radio frequency: 869.5 MHz, range (line of sight): up to 20 m,
Dimensions: L= 178 mm, W= 46 mm, H= 18 mm, material: plastic, delivery: incl. strain relief, controller per remote control: max. 4 (with optimal wireless connection)

Remote control:
Voltage (battery): 4.5 V DC - 3 x AAA (not included)
Radio Frequency: 869.5MHz
Transmission power (Ps) < 0 dBm,
Range (line of sight): up to 20 m,
Dimensions: L= 120 mm, W= 48, H= 18 mm, material: plastic

Features:
- On off
- Light color change via touch wheel
- Dimming of the set light color
- Memory buttons S1 / S2
- Selection buttons 25% / 50% / 75% / 100% brightness.
Degree of protection: according to DIN EN 60529: IP20,
protection class: (EN 61140) III
voltage: 12V 24V,

Funksteuerungsset

Tunable White

2.- pole
IP65

Gelklemmen Einzeldrahtverbinder

Gel terminals single wire connectors

max 16A,
max. 12 volts/190 watts or 24 volts/380 watts
Dimming via Dali signal or using standard buttons (SwitschDIM)
L= 120mm
W=30mm
H= 21mm
IP 20

LED-Dimmer 12-24 Volt

PWM Dimm 12-24 V
1-10 A, max. 12 V/120 W or 24 V/240 W
Dimm standard taster or
1-10 V (0-10 V) or pot possible
L= 167 mm
B= 40 mm
H= 30 mm
ta= -20°C bis +50°C
IP 20

LED-Dimmer 12-24 Volt

LED-PWM Repeater/boosters (mono)
to need to boost the PWM Signals with an additionally power supplymax. 10 A (5-24V/DC)
L= 176 mm
B= 46 mm
H= 30 mm
ta= -20°C bis +50°C
IP 20

LED-Dimmer 12-24 Volt

LED Dimmer OTi Dali DIM 2x700/CS UNV1
dimmer switch with intelligent process technology
dimmer with touch function
dimmer area 0,1 ... 100%
input: 10-24 V/DC
L= 172 mm
B= 42 mm
H= 20 mm
ta= -20°C bis +50°C
IP 20

LED-Dimmer 12-24 Volt

max. 12 volts/72 watts or 24 volts/144 watts,
Dimming via standard buttons or
1-10 volts (0-10 volts) or potentiometer possible
L= 135mm
W= 30mm
H= 20mm
IP 20

LED-Dimmer 12-24 Volt

An external voltage supply needed.
Output signal (dimming): PWM (pulse width modulation)
Overload, short circuit, over temperature and open
circuit protection
Max Output Current: 5A
The device can be controlled via DALI
or a button (push dimming)or 1-10 V can be controlled.
To expand performance, multiple devices can be used as Master / Slave operated.

Material: Plastic,
Degree of protection on the room side: according to DIN EN 60529: IP20,
Protection class: (EN 61140) II,
Voltage: 24V DC, power: 120W,
L= 183mm
W= 83mm
H= 23mm
Weight= 80g

LED-Dimmer 12-24 Volt

OTi Dimm 1 – 10 V
intelligent analog dimmer 1 to 10 V
with constant output voltage
10V/DC max. 50W – 24V/DC max. 120W
dimmer area 0,1 ... 100%
input: 10-24 V/DC
L= 172 mm
B= 42 mm
H= 20 mm
ta= -20°C bis +50°C
IP 20

LED-Dimmer 12-24 Volt

D= 50mm
H= 52mm

Color rendering: CRI >90 (KW+WW)
Adjustable from 2,000° to 6,500° Kelvin

Light output per light colour:
With warm white 4 watts 2,000° K 318 lumens
at 4 watts 6,500° K 415 Lm
At full power of warm white and cool white
8 watts 4,500° 700 lm
4,000 Kelvin/4,000 hrs

Leuchtmittel

LED-Reflektoreinsatz MR16

LED RGB lightings body 51mm
with heat sink
outer diameter= 50 mm
high=63 mm
optical lens: 45°
output: 13,8 W
control: negativ
average life: 20.000-25.000 hours
IP20
incl. 100 mm connection cable

Leuchtmittel 12 Volt

12 Volt

For the Cube, Bowl and Cuneo series sauna lights
with 2 pieces glued back to back
warm white LEDs 2,700° K,
each with max. 600 mA, 240 lumens
Perfomance. Including soldered two-pin round plug.
LEDs sprayed with colorless paint.

Leuchtmittel Einschubplatte mit 2 Leuchtmittel für 3D Lampen

GU 10 LED bulb 5,50 Watt
with aluminium heat sink
with plastic lens: viewing angle: 40 °
D= 50 mm
H = 59 mm
AC 220-240 V / 5,50 W
2.700 kelvin/370 lumen
CRI > 80
average life
ambient temperature: 25.000 h
dimmable

Leuchtmittel GU10

Leuchtmittel Kaltspiegelleuchtmittel Halogen

Slide-in LED bulbs
in the various sauna lights
with warm white LEDs 2,700° K
12 to 24 volts / 10.56 watts, 408 lumens
with soldered two-pole phoenix clamp (socket),
with loosely packaged two-pin phoenix clip (plug)
and 2 pcs. ferrules.
LEDs sprayed with colorless paint.

2 variants: one-sided or double-sided light

also available as RGB on request

Leuchtmittel LED für 3D Lampen

D= 50mm
H= 52mm
24 volts/ 8 watts
beam angle = 38�,
900lm/ 2,850� Kelvin
Color rendering CRI>90

Leuchtmittel LED-Modul

D= 50mm
H= 40mm
350mA/ 6 watts
beam angle = 38°,
680lm/ 2,700° Kelvin
Color rendering CRI>80

Leuchtmittel LED-Modul

D= 50mm
H= 52mm
24 volts/watt dim 4colour RGb+WW
Beam angle 60°
RGB (Combined) 165lm
WW 2,850° Kelvin, 235lm, CRI>80
Connection cable 5-core
Driving negative, common anode (C.A.)

Leuchtmittel LED-Module

350mA, 12.5W,
Color rendering SunLike, CRI > 97.
Luminous flux: 920lm,
Beam angle 38°
Color Temperature: 3000K
Execution: Plug&Play
Material: aluminum / plastic,
Degree of protection: according to DIN EN 60529, IP20,
Protection class: (EN 61140) III

Leuchtmittel LED-Reflektoreinsatz MR16

MR16 LED bulb 5,50 Watt
with aluminium heat sink
with plastic lens: viewing angle: 40 °
D= 50 mm
H = 48,11 mm
AC 12 V/5 W
Power supply: electronic low voltage transformers
2.700 kelvin/ 370 lumen
CRI > 80
average life
ambient temperature: 25.000 h
dimmable

Leuchtmittel MR16

Leuchtmittel Pigmy

double-sided glowing with 2 LEDs warm white
LED bulbs to slide into various
sauna lights
with 2 pieces glued back to back
warm white LEDs 2,700° K
each with max. 600 mA, 240 lumens
Including soldered two-pin round plug.
LEDs sprayed with colorless paint.

Leuchtmittel für 3D Lampen

Replacement bulb for our
flexible light strip "Xenoflex"
30 lumen

Leuchtmittel für Xenoflex Lichtband

cable with 10 mm
grey
with circular plugs 4x1,50 mm²
gel filling transparent
IP68

Paguro Kleinstverteilerdose 5633/6///86IP68

Micro distribution box 5633/6//86IP68

Supply voltage: 12 or 24 VOLT
Power supply: 1 pc. plug for round socket
Output: 4-pole MSTB plug with counterpart
Dimmable in 4 steps
Can only be operated via radio remote control
No interface to FCU control unit
No connection possibility for further (slave) control units
Without front foil or housing print Protection class IP3X: no protection against humidity
Length: 108 mm
Width: 89 mm
Height: 45 mm

Customs tariff number: 9405 990

Made in Germany

RGB Steuerung für Domesticus Set für Funkfernbedienung

RGB control for Domesticus Set for radio remote control

Supply voltage: 12 or 24 VOLT
Power supply: 1 pc. plug for round socket
Output: 4-pole MSTB plug with counterpart
Dimmable in 4 steps
Can only be operated via Blutooth
No interface to FCU control unit
No connection possibility for
further (slave) control units
Without front foil or housing print
Protection class IP3X: no protection against humidity

Length: 108 mm
Width: 89 mm
Height: 45 mm

Steuerung 12-24Volt

Control 12-24 Volt

to control with remote controller 40-FA.210.FF
by the following functions
6 pcs. 230 Volt relay, switchable individually optionally
by switch or button max. load for each relay 3 A
Master RGB controller 12 Volt LED`S and for the syncronisation
with the Slaves RGB-LED controller 40-FA.210.12-24.SL and
40-FA.210.250-500.SL with RS 232 interface for DMX/KNX and Dali controllers.
DMX/KNX and Dali are only possible in the standard version for the RGB controller.
connection: 12 Volt
installation to a top-hat rail
IP 20 for free activation of the electric lightboxes
for manual operations or with 4 individual programs
B= 210 mm
H= 230 mm
T= 75 mm
IP 20

equipments:
Dimmer control module RUD 2 – 38.01.09500203
adapted for installation to a top-hat rail
IP 20

Remote dimmer LT 1200 - 38.01.09500225
max. load 1.200VA
adapted for installation to a top-hat rail
IP 20

Remote dimmer LT 500 - 38.01.09500226
max. load 500VA
adapted for installation to a top-hat rail
IP 20

Flat-rate wiring - 38.01.09500VERK

Steuerung Multitask II

Control Multitask II

LED control-ground module for current-controlled and for power supply RGB/W LEDs
1x output for power supply RGB/W LED‘s 12-24V/10A
1x Output for current controlled RGB/W LED‘s 350-700 MA-input Max. 38V
1x Input for update or to import special program
grey plastic CASE for Fixing an a top-hat-rail
length= 155 mm
width= 85 mm
High= 60 mm
IP 20
Made in Germany

Optional slots for the following functions:
1x slot for remote controller
1x slot for FAsel/ BUS to steer the LED‘s with a Fasel- sauna control/RJ45 plug
1x slot/slave for power supply RGB/W Led‘s12-24V/10A
1x slot/slave for current-controlled LED`s 350 – 700 mA – input max. 38V
1x slot input/Output for futher slaves
1x slot for DMX- interface
1x slot for Dali- interface
1x slot for potential- free contacts/ Max. 16 combinations
1x slot dimmable from 1-10V

equipment:
218.001.FFB plug circuit board
to control the Multiversum control with a remote controller
Made in Germany

218.003.FAS plug circuit board
to control the Multiversum control with Fasel/Bus
Made in Germany

218.004.SLA plug circuit board
Input/Output for futher slaves
for power supply RGB/W LED`s 12 – 24 Volt /10 A
or for current-controlled RGB/W LED`S 350 – 700 mA/ Max Input 38 V
Made in Germany

218.005.DMX plug circuit board
for DMX interface
DMX control and programming on-site
Made in Germany

218.006.DALI plug circuit board
for DALI interface
DALI control and programming on-site
Made in Germany

218.007.POT plug circuit board
for potential- free contacts
Max. 16 combinations possible
Made in Germany

218.008.DIM plug circuit board
dimmable from 1-10 V
Made in Germany

Please note that the app for Bluetooth control will be discontinued at the end of the year!!!

Steuerung Multiversum

Control Multiversum

without interface
for RGB LEDs 12-24V with a
pontential-free input for single color selection or
a pre-programmed color gradient
duration approx. 15 minutes
max. 12V/110W or
max. 24V/220W
IP 20

output with 4-cores and AMP plugs
L= 199 mm
B= 124 mm
H= 31 mm

Steuerungen 12-24 Volt

Control for 12-24 volt

for RBG LEDs 12-24V
synchronizeable with master control
40-FA.210.12-24.MA,
40-FA.210.12-24.MAF,
40-FA.210.350-500.MA,
40-FA.210.350-500.MAF and
"Multitask 2"
max. 12V/110W or
max. 24V/220W
IP 20

output with 4-cores and AMP plugs
input with RJ45 plug
L= 199 mm
B= 124 mm
H= 31 mm

Steuerungen 12-24 Volt

Control for 12-24 Volt

with interface
for remote control and RJ45 to control
RGB LEDs 12-24V max. via
remote control 40-FA.210.FF IP 65
or via FCU series of Fasel controllers
max. 12V/110W oder
max. 24V/220W
IP 20

output with 4-cores and AMP plugs
L= 199 mm
B= 124 mm
H= 31 mm

Steuerungen 12-24 Volt

Control for 12-24 volt

with interface
for remote control and RJ45 to control
RGB LEDs 350 mA via
remote control 40-FA.210.FF IP 65
or via FCU series of Fasel controllers
max. 27 LEDs/1W
IP 20

output with 4-cores and AMP plugs
L= 199 mm
B= 124 mm
H= 31 mm

Steuerungen 350mA

Control 350mA

slave
for RBG LEDs 350 mA synchronizeable
with master control
40-FA.210.350-500.MA,
40-FA.210.350-500.MAF,
40-FA.210.12-24.MA,
40-FA.210.12-24.MAF and
"Multitask 2"
max. 27 LEDs/1W
IP 20

output with 4-cores and AMP plugs
input with RJ45 plug
L= 199 mm
B= 124 mm
H= 31 mm

Steuerungen 350mA

Control 350mA

without interface
for RBG LEDs 350 mA with a
pontential-free input for
single color selection or
a pre-programmed color gradient
duration approx. 15 minutes
max. 27 LEDs/1W
IP 20

output with 4-cores and AMP plugs
L= 199 mm
B= 124 mm
H= 31 mm

Steuerungen 350mA Master

Control 350mA

LED Power supply 12V/ 100W
Phase angle or Phase selection dimmable (TRIAC)
Input: 230 V
L= 157 mm
B= 46 mm
H= 19 mm
Weight: 450g
ta= -20°C to +40°C
IP 65

Transformator 12 Volt

LED Power supply 12/260W
Input: 230 V
L= 2.252 mm
B= 90 mm
H= 43,8 mm
Weight:750g
ta= -20�C to +50�C
IP 67

Transformator 12 Volt

LED Power supply 12V/ 100W
Phase angle or Phase selection dimmable

Input: 230 V
L= 237 mm
B= 64 mm
H= 41 mm
Weight: 1.070g
ta= -20°C to +40°C
IP 65

Transformator 12 Volt

LED Power supply 12V/ 100W
Phase angle or Phase selection dimmable

Input: 230 V
L= 237 mm
B= 64 mm
H= 41 mm
Weight: 1.070g
ta= -20°C to +40°C
IP 65

Transformator 12 Volt

LED power supply unit 24V DC
switchable
This power supply unit is protected against overvoltage, short-circuit, thermal
and short-circuit as well as thermal and electrical overload.
Output power: 1 - 240 watts
Output voltage 24.20 volts +/- 0.50 voltsNominal voltage: 220 - 240 volts
Max. Ambient temperature -30° - +55° Celsiu
Max. Temperature at measuring point tc: 80° C
L= 244 mm
W= 71 mm
H: 38 mm
Hole spacing length: 250 mm
Weight: 1.340 g
IP65

Transformator 24 Volt

LED Power supply 24/72W
Input: 230 V
L= 115 mm
B= 53 mm
H= 37 mm
Weight: 340g
ta= -20°C to +55°C
IP 20

Transformator 24 Volt

LED Power supply 24V/130W
Input: 230 V
Dim 1-10V
L= 265 mm
B= 68 mm
H= 40 mm
Weight: 943g
ta= -20°C to +60°C
IP 66

Transformator 24 Volt

LED Power supply 24V/75W
Input: 230 V
L= 241 mm
B= 43 mm
H= 30 mm
Weight: 560g
ta= -20°C to +60°C
IP 64

Transformator 24 Volt

LED Power supply 24/72W
Input: 230 V
L= 115 mm
B= 53 mm
H= 37 mm
Weight: 340g
ta= -20°C to +55°C
IP 20

Transformator 24 Volt

LED Power supply 24V/40W
Input: 230 V
Dim 1-10V
L= 208 mm
B= 43 mm
H= 26 mm
Weight: 410g
ta= -20°C to +60°C
IP 66

Transformator 24 Volt

LED Power supply 24V/20W
Input: 230 V
Dim 1-10V
L= 178 mm
B= 43 mm
H= 25 mm
Weight: 410g
ta= -20°C to +60°C
IP 66

Transformator 24 Volt

Output power: 80 watts,
output voltage 24 volt
nominal voltage: 220 - 240 volts
nominal current: 0.38A (at 230 volts)
Mains frequency: 50-60Hz
device power loss: 10.3 watts
max. Ambient temperature -40 ° - + 50 ° Celsius
ECG efficiency: 92% (at full load and 110 - 230V), inrush current: 30A (? 200 at 220V),
electrical isolation primary / secondary: 3 kV
Overtemperature protection: up to 4 kV
short-circuit protection: yes
overload protection: yes
dimmable: no
LxWxH: 170 x 53 x 31.5 mm
weight: 513 g
Standards: According to IEC 61347-1 / According to IEC 61347-2-13 / According to
EN 55015 / According to EN 61547 / According to EN 61000-2-
2 / According to EN 61000-3-2 / According to EN 60598-1 / According to
EN 62384
Approval marks - approval: CE / CCC / TISI / RCM

Transformator 24 Volt

plug transfomer
LED Power supply 24V/70W
Input: 230 V
L= 950 mm
B= 350mm
H= 550mm
Weight: 275g
ta= -20°C to +55°C
IP 20

Transformator 24 Volt

LED Power supply 24V/120W
Input: 230 V
L= 250 mm
B= 60 mm
H= 39 mm
Weight: 1.100g
ta= -20°C to +55°C
IP 67

Transformator 24 Volt

LED power supply unit 24 V DC
dimmable. .
Material: plastic
Protection class: according to DIN EN 60529: IP20 Protection class: (EN 61140) II
Voltage: 24V
Power: 12-75W
Type of dimming: phase section .
Secondary voltage 24 V
Power 12-75 W
B= 60 mm
L= 185 mm
H= 31 mm
Ambient temperature (ta) 20 °C to +50 °C
Measuring point (tc) max. +85 °C

Transformator 24 Volt

LED Power supply 24V/130W
Input: 230 V
Dim 1-10V
L= 208 mm
B= 63 mm
H= 37 mm
Weight: 943g
ta= -20°C to +60°C
IP 66

Transformator 24 Volt

LED Power supply 24V/50W
Input: 230 V
L= 220 mm
B= 44 mm
H= 22 mm
Weight: 330g
ta= -20°C to +50°C
IP 66

Transformator 24 Volt

LED power supply unit 24 V DC
dimmable.
Material: plastic,
Protection class: according to DIN EN 60529: IP20, Protection class: (EN 61140) II,
Type of dimming: phase section .
Voltage input 220-240 V
Frequency 50 Hz
Secondary voltage 24 V
Output power 12 to 120 W
L= 223 mm
W= 64 mm
H= 32 mm
Ambient temperature (ta) 20 °C to +45 °C
Measuring point (tc) max. +85 °C

Transformator 24 Volt

with round plug 12V DC
incl. connection cable
ta= 0°C to 40°C
tc= 70°C
Measures: L x B x H
IP 20

Transformator 38 Volt

Dimmable via Dali signal or
via a standard button (SwitschDIM)
30W at 250mA
40W at 350mA
47W at 400mA
50W at 450mA,
50W at 500mA
50W at 550mA
50W at 600mA
50W at 700mA.
Input voltage 110 - 240 vol
Max. cable length at 500mA up to 50 m (1.00 mm²)
Max. cable length at 700mA up to 50 m (2.50 mm²)

Cover with strain relief in the connection area
Pri: 0.5 - 2.50 mm², Sec.: 0.5 - 2.50 mm²
DALI: 1...10V: 0.2 - 1.50 mm²
Overheating protection, short-circuit protection, mains overvoltage protection, protection class II
L= 124mm
W= 79mm
H= 22mm

IP20

Transformatoren 350-700mA

LED power supply
250-700mA 1 - 20 Watt
V-out DC 2-54 V
L= 110 mm
W= 52 mm
H= 22 mm
weight= 100 gr
IP20

Transformatoren 350-700mA

protection against excess temperature,
short circuit and open circuit
with reset button on
secondary winding
stabilized output
constant output 350 mA
Input: 230 V
L= 110 mm
B= 47 mm
H= 27 mm
Weight: 85g
IP 20

Transformatoren 350-700mA

LED power supply
in white plastic case
Input: 230V
Output: 7W/ 0,350mA / 20V
L= 85 mm
W= 50 mm
H= 19 mm
weight: 105 g
ta = von -20 bis +50° Celsius
tc= 75°
IP20

Transformatoren 350-700mA

Case/button colour: Stainless steel
Function: momentary
Type of lighting: none
Switch position: 1 x = off/on
Type of contact: normally open
Material: stainless steel
Connection: solder lug
Switching voltage: 12V/DC or 24V/DC
Switching current max: 0.005A
Installation-Ø: 18 mm at 12V
19 mm at 24V
Plate thickness (max): 12 mm at 12V
13.5 mm at 24V

Vandalismusgeschützer Drucktaster

Vandalism-proof pushbutton

Some unexpected changes in your blueprints?
If you suddenly need more than just
the standardized lenghts of our
wires, you can extend it with
this extension easily.
wires= red, green, blue, black
for RGB LEDs
with AMP plugs

Special lenghts possible if requested.

Verlängerung Silikon 4-polig

Extension silicone 4-pole

Some unexpected changes in your blueprints?
If you suddenly need more than just
the standardized lenghts of our
wires, you can extend it with
this extension easily.

Special lenghts possible if requested.

Verlängerung mit Rundstecker

Extension with round plug

Is needed, to connect two
or more RGB LED lightings
to one control unit.

wires= red, green, blue, black, white
for RGBWLEDs
Cable : LiYY 5 x 0.34 mm²,
with JST plugs

Verlängerungskabel

mit JST Stecker / extension cable with jst plug

Some unexpected changes in your blueprints?
If you suddenly need more than just
the standardized lenghts of our
wires, you can extend it with
this extension easily

Verlängerungskabel

Für Domsticusplatinen / extension cable for Domesticus

wall bracket for remote control

Wandhalterung

Wall bracket

Is needed, to connect two
or more LED lightings via round plugs
together.
wires= black
for single coloured LEDs
with round plugs

Y-Kabel RUND 2-polig

Y-cable ROUND 2-pole

Is needed, to connect two
or more LED lightings
together.
L= ca. 250 mm with round plugs

Y-Kabel Silikon 2-polig mit 3 Abgängen u. Rundstecker

Y-cable silicone 2-pole with 3 outlets and round plug

Is needed, to connect two
or more RGB LED lightings
to one control unit.
wires= red, green, blue, black
for RGB LEDs
with AMP plugs

Y-Kabel Silikon 4-polig

Y-cable silicone 4-pole

bottom of page